PORSCHE 996 TURBO ENGINE KIT
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
The 996 turbo 74mm competition plenum is designed to function with more seriously modified turbos developing over 600+ horsepower. Although this 74mm application has been used with great success on a variety of turbos ranging from mildly modified to 1000+ hp. This application requires the larger 74mm Porsche throttle body (additional purchase required) and comes with additional hardware to complete the kit. This competition turbo plenum will help modified 996 turbos achieve maximum engine performance.
The increased air flow and air speed develop by the larger plenum is designed to work with larger turbos, intercoolers, intake piping, high flow y pipes and more aggressive software. Horsepower gains start a...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$1,343.25
Make a selection
Stoptech big brake kit front slotted red caliper Porsche 997 turbo 2007
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that optim...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$3,882.60
Make a selection
Stoptech big brake kit front slotted black caliper Porsche 997 turbo 2007
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that opt...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$3,882.60
Make a selection
This 930 turbo sport muffler provides a more pronounced, aggressive sound while still appearing like a factory muffler. It is fabricated in europe with high quality t304 l stainless steel. The muffler is less restrictive than the factory system and offers increased performance. It is a direct replacement for turbo 3.0 l (engine code 930.50/52) models from 1975-77. It replaces original part # 930 111 025 02 and 930 111 025 04. Features: made of t 304 l stainless steel reduces backpressure for increased performance factory muffler appearance seamless bolt on installation European made by dansk we recommend purchasing our installation kit, part # FVDmk930001 quality tuning part manufactured by dansk. They offer a ...(choose a part on the right to read more)
View/Change Diagram
$2,373.80
Make a selection
This kit's contains a sachs racing clutch disc, made with sintered metal plates that have a higher friction coefficient than plates with organic friction. A sintered disc allows for higher transmittable torque and is more dirt and oil resistant. Sintered disc's aggressive start performance makes them very suitable for racing. Please note this kit is meant for modified cars that are running: higher boost levels, a larger turbocharger, a larger displacement motor, and full exhaust system. Due the aggressive start performance of the sintered disc, we do not recommend this kit for street cars. Clutch kit is made in Germany and includes: 1 qty. Clutch disc (zf sachs race engineering, gmbh) 1 qty. Pressure plate (z...(choose a part on the right to read more)
General Fitment 911 1970-73
From $1,779.80
Make a selection
Secondary catalytic bypass for Cayenne turbo and turbo s 2003-2006. This kit replaces the first set of restrictive factory catalytics. They increase horsepower and torque while reducing turbo lag and give the Cayenne a great sound.
- + 18 crank hp & + 17 crank torque gain
- 2 1/2" (63.5 mm) diameter tubing (reduces thermal stress)
- 25 lbs. Weight savings
- t 316 stainless steel for improved durability over t 304
- includes factory style hangers
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- no check engine light
For a even more aggressive growl purchase a sport muffler!
FVD exhaust systems carry a 2 year warranty!
This item may need to be sourced f...(choose a part on the right to read more)
General Fitment CAYENNE 2003-06
$1,653.30
Make a selection
In the quest to create the most well balanced suspension for the 997 turbo, agency power has developed these sway bars to our specifications. The all wheel drive Porsche turbo cars naturally have a lot of under steer. Under steer is when you take a turn but your car keeps going outwards. With an awd car, getting the rear end around can be easily done with a larger sway bar. However you do not want to induce to much over steer as then you will be throttle steering or sent into a drift. With the combination of a properly balanced front and rear sway bar, your car will handle turns much more neutrally and quickly. The sway bars are designed to stiffen up the chassis as well to reduce body roll. Some times called ā...(choose a part on the right to read more)
General Fitment 911 2005-08
Product details:
High performance intercooler upgrade engineered for optimum flow efficiency lowers intake temperature and improves flow for maximum power gains
Features:
-fits all Porsche 911 turbo 930 vehicles (1976-1989)
-available for factory OEM turbo or upgraded k27 turbos
-increases horsepower and torque by 40 whp and 29 ft-lbs
-flow as much as 900 cfm @ 2.6/1 pr ratio with less than 1 psi drop
-cubic inch mass increase from 258 (oem) to 650
-c2 turbo long-neck style with no o-rings for a leak proof charge.
-intercooler kit includes bypass valve, bypass sleeve, rubber elbow, 5-ply silicone hoses, and all mounting ha...(choose a part on the right to read more)
General Fitment 911 1987-89 911 1984-86 911 1978-83 930 1975-77
$2,395.00
Make a selection
This turbo recirculation valve is the result of of 25 years of experience and engineering expertise. With the reputation for innovating and manufacturing the best automotive valves in the world, you can be certain that there is currently no better replacement valve available. The fmdv008pa version seen here has the benefit of a 90 degree vacuum port, that can be rotated to three different orientations. This is often the preference where either space is restricted, or the original fitment valve has a 90 degree connection, either on the valve or connecting hose.
Forge's recirculation valve features a greater flow rate than the OEM Bosch valve, as well as a faster response time, due to our revised design. By usi...(choose a part on the right to read more)
General Fitment 911 1989-94 911 1987-89 911 1984-86 911 1978-83 930 1975-77 944 1985-88 944 1989-91
Brombacher 997 tt (super sound version) stainless steel exhaust system
Facts:
- + 35 crank hp & + 25 crank torque (if pressure sensor is adjusted via software)**
- catalytic bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purcha...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12 911 TURBO/GT2 2007-09
$2,117.50
Make a selection
Brombacher 997 tt (TUV version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque (with FVD software)**
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5" (90/100mm) tips and ar...(choose a part on the right to read more)
General Fitment 911 2005-08
$4,980.80
Make a selection
K-16/24 turbo (up to 555 hp) power is focused on low and mid-range rpm's. Facts: larger compressor wheel with extended tip. 47.5mm inducer diameter. Cnc modified compressor housing modified and improved back plane uprated staggered gap turbine uprated thrust bearing modified wheel to reduce backpressure balancing of all components factory vacuum unit new bearings and seals all parts are reconditioned and balanced FVD Brombacher993 k-16/24 new turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications. The process starts with re-profiling the OEM turbocharger compressor housing and m...(choose a part on the right to read more)
$2,976.60
Make a selection
With the insane results of our aluminum y-pipe kit for the Porsche panamera turbo, we wanted to step up the luxury look of the engine bay with a full carbon fiber version. this carbon fiber y-pipe is a full replacement and includes everything you need to install in place of the original.
Looking at the stock y design in front of the throttle body, we new there was improvements to be made. This throttle body is the same size as the Cayenne tt throttle body we use on our 996tt and 997tt upgrade kits. The stock y-pipe is a 2 piece plastic y design that is smooth on the inside with a "deflector" internally to channel air. The bad part about the stock one is it goes from a 78mm id at the throttle body down to...(choose a part on the right to read more)
General Fitment PANAMERA 2010-14
$1,849.95
Make a selection
K-16/24 turbo (up to 555 hp) power is focused on low and mid-range rpm's. Facts: larger compressor wheel with extended tip. 47.5mm inducer diameter. Cnc modified compressor housing modified and improved back plane uprated staggered gap turbine uprated thrust bearing modified wheel to reduce backpressure balancing of all components factory vacuum unit new bearings and seals all parts are reconditioned and balanced FVD Brombacher993 k-16/24 new turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications. The process starts with re-profiling the OEM turbocharger compressor housing and m...(choose a part on the right to read more)
$2,976.60
Make a selection
Scavenging and aeration in the oil pan have been identified as a problem in the 996, 997 and Boxster models that experience high g-forces on the racetrack.
FVD has the solution:
The ?FVD motorsport? Oil pan has the baffling concept of the x51 oil pan. It also increases the oil capacity because the pan is deeper. This pan adds close to 3/4 of quart (0.6 liters) of oil over the original x51 pan. This allows for increased oil cooling and engine performance by preventing oil starvation and oil foaming.
The ?FVD motorsport? Oil pan is also designed with external cooling fins
Which helps to lower the oil temperature.
Models: Boxster, Cayman, 996 and 997 models (excludes 3.8 s, GT3 and turbocharged models).
...(choose a part on the right to read more)
General Fitment 911 2005-08 911 1998-05 CAYMAN 2006-08 BOXSTER 2005-08 BOXSTER 1997-04
From $544.50
Make a selection
Kit includes:
Ecu software with handheld flashtool, 2x sport air filter
Factory:
Engine - v8 twin-turbo
Capacity - 4511ccm
Compression ratio - 9,5:1
Max. Power - 331kw (450hp) @ 6000rpm
Max. Torque - 620nm (457 lbf ft) @ 2250-4750rpm
Max. Speed - 266km/h
Max. Rpm - 6500rpm
Acceleration 0-100km/h - 5.6s
FVD level 1 tuning:
Max. Power - 375kw (510hp) @ 6000rpm
Max. Torque - 710nm (524 lbf ft) @ 4000rpm
Max. Speed - 275km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 5.2s
- a simple handheld obd2 tool is provided to flash your Cayenne conveniently at home!
- software is completely reversible and undetectable for dealer service / diagnostics / extended warranty.
- dyno proven and comprehens...(choose a part on the right to read more)
General Fitment CAYENNE 2003-06
$1,076.90
Make a selection
With only an FVD sport motronic and sport filters you can increase your Cayenne s horsepower to 360 (a 20 hp gain!). Even with this added power your Cayenne will retain factory drivability and day in, day out reliability.
Kit includes:
Ecu software with handheld flashtool, 2xsport air filter
Genuine:
Engine - v8
Capacity - 4511ccm
Compression ratio - 11,5:1
Max. Power - 250kw (340hp) @ 6000rpm
Max. Torque - 420nm @ 2500-5500rpm
Max. Speed - 242km/h
Max. Rpm - 6500rpm
Acceleration 0-100km/h - 7.2s
Tuning:
Max. Power - 265kw (360hp) @ 6000rpm
Max. Torque - 445nm @ 4500rpm
Max. Speed - 252km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.8s
- a simple handheld obd2 tool is provided to ...(choose a part on the right to read more)
General Fitment CAYENNE 2003-06
$1,087.90
Make a selection
kit includes:
Ecu software with flashclient cable., sport air filters (2), GT sport exhaust system including installation kit, sport intercoolers and upgraded sport turbchargers for the ultimate in Cayenne performance
Factory:
Engine - v8 twin-turbo
Capacity - 4806ccm
Compression ratio - 10,5:1
Max. Power - 368kw (500hp) @ 6000rpm
Max. Torque - 700nm (516 lbf ft) @ 2250-4500rpm
Max. Speed - 275km/h
Max. Rpm - 6500rpm
Acceleration 0-100km/h - 5.1s
Tuning:
Max. Power - 650 hp @ 4470rpm
Max. Torque - 1030 nm (760 lb. Ft) @ 4320rpm
Max. Speed - 310km/h
Max. Rpm - 6700upm
Acceleration 0-100km/h - 4,1s
For 27 + years, FVD-Brombacherhas been setting the standard for PorscheĀ® engine bui...(choose a part on the right to read more)
General Fitment CAYENNE 2007-10
$23,068.33
Make a selection
FVD panamera turbo level 1 power kit
Factory panamera turbo in normal mode based on Porsche ag #'s:
Engine - v8 twin-turbo
Capacity - 4806ccm
Compression ratio - 10,5:1
Max. Power - 368kw (500hp) @ 6500rpm
Max. Torque - 700nm (516 lb ft) @ 2250-4500rpm
Max. Speed - 303km/h (188 mph)
Max. Rpm - 6500rpm
Acceleration 0-100km/h (0-62 mph) - 4.2s
FVD level 1 power kit (normal mode or cars without the sport chrono)*:
Max. Power - 434kw (590hp) @ 6200rpm
Max. Torque - 780nm (575 lb ft) @ 3000-5000rpm
Max. Speed - 315km/h (195 mph)
Max. Rpm - 6800rpm
Acceleration 0-100km/h (0-62 mph) - 4.0s
Highlights:
- not a "piggy back" or external unit that is plugged into the factory ecu. Our software r...(choose a part on the right to read more)
General Fitment PANAMERA 2010-14
$1,373.90
Make a selection
FVD's level 2 kit for the Cayenne adds 35bhp while keeping stock driveability! This kit brings a whole new life to the Cayenne with added performance and sound! The muffler and catalytics included in this kit give the truck the agreesive exhaust note to backup the added performance.
Genuine:
Engine - v6
Capacity - 3189ccm
Compression ratio - 11,5:1
Max. Power - 184kw (250hp) @ 6000rpm
Max. Torque - 310nm @ 2500-5500rpm
Max. Speed - 214km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 9.7s
Tuning:
Max. Power - 210kw (285hp) @ 6000rpm
Max. Torque - 345nm @ 5500rpm
Max. Speed - 225km/h
Max. Rpm - 6750rpm
Acceleration 0-100km/h - 8.8s
Kit includes:
Ecu software with handheld flashtool., sport...(choose a part on the right to read more)
General Fitment CAYENNE 2003-06
$4,808.95
Make a selection
Kit includes:
Software dme, sport air filter, sport header system.
Some models require oxygen sensor relocation.
Please note: this dme cannot be flashloaded. Dme must be sent to us.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s
Tuning:
Max. Power - 162kw (220hp) @ 6000rpm
Max. Torque - 270nm (199lbf ft) @ 5500rpm
Max. Speed - 251km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.6s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep u...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,747.90
Make a selection
Kit includes:
Software ecu software (flashclient cable) and sport air filter
Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 185kw (252hp) @ 6250rpm
Max. Torque - 305nm (225lbf ft) @ 4500rpm
Max. Speed - 260km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.6s
Tuning:
Max. Power - 195kw (265hp) @ 6400rpm
Max. Torque - 325nm (240lbf ft) @ 4900rpm
Max. Speed - 267km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,053.80
Make a selection
Kit includes:
Software ecu software (flashclient cable), power-flow kit, sport header system, sportmuffler (2x90mm tips).
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2687ccm
Compression ratio - 11,0:1
Max. Power - 162kw (220hp) @ 6400rpm
Max. Torque - 260nm (192lbf ft) @ 4750rpm
Max. Speed - 250km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 6.6s
Tuning:
Max. Power - 184kw (250hp) @ 6500rpm
Max. Torque - 300nm (221lbf ft) @ 5000rpm
Max. Speed - 265km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 6.1s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$3,861.00
Make a selection
Kit includes:
Software ecu software (flashclient cable), sport air filter and sport header system.
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 185kw (252hp) @ 6250rpm
Max. Torque - 305nm (225lbf ft) @ 4500rpm
Max. Speed - 260km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.6s
Tuning:
Max. Power - 200kw (272hp) @ 6400rpm
Max. Torque - 335nm (247lbf ft) @ 4900rpm
Max. Speed - 270km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.3s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche eng...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,747.90
Make a selection
Kit includes:
Software dme exch., sport air filter
Please note: this dme cannot be flashloaded. Dme must be sent to us.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s
Tuning:
Max. Power - 158kw (215hp) @ 6000rpm
Max. Torque - 260nm (192lbf ft) @ 4500rpm
Max. Speed - 247km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.7s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our en...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,053.80
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|